KEEBD Dumbpad OLED vs NarfpadOLED Screen vs Choc Switch Kit
Choose the Dumbpad OLED for visual feedback and standard MX switches, or the Narfpad for a low-profile Choc switch build.
KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
Which one should you get?
Get the
KEEBD Dumbpad OLED
OLED Screen
- Includes an OLED display for showing system information or layer status.
- Larger 4x4 layout with support for up to two rotary encoders.
- Kit includes through-hole diodes and optional hot-swap headers for the controller and display.
- Switches are soldered. Swapping them means soldering.
Get the
KEEBD Narfpad
Choc Switch Kit
- Designed for low-profile Kailh Choc switches and keycaps.
- Kit includes an acrylic bottom plate, standoffs, screws, and rubber feet.
- Includes a rotary encoder and SMD diodes pre-soldered onto the PCB (Kailh Choc sockets).
- Switches are soldered. Swapping them means soldering.
Select the KEEBD Dumbpad OLED if you want a display and plan to use common MX switches. Opt for the KEEBD Narfpad if your goal is to build a low-profile macropad with Choc switches. Both are projects for enthusiasts comfortable with soldering and firmware configuration.
The differences that matter
Skip the 40-row spec sheet. These are the specs that change how each board feels, sounds, and fits your desk.
KEEBD Dumbpad OLED
KEEBD Narfpad
Display
OLED
None
A case display rather than a typing feature
Released
2022
2024
- KEEBD Dumbpad OLED
- KEEBD Narfpad
- Performance
- 3939
- Build quality
- 4340
- Productivity
- 4545
- Customizability
- 6153
- Portability
- 6162
- Layout size: Macropad
- Case material: Acrylic
- Knob
What will you mostly use it for?
The Dumbpad OLED wins in scenarios where visual feedback or maximum key count is valuable, such as for office work, programming, and content creation. The Narfpad is the better choice for a portable, low-profile build due to its Choc switch design. For gaming, both serve the same core function equally well, making the choice dependent on your switch preference.
It's a tie
- Both are 4x4 or 3x3 macropads for assigning game commands.
- Both kits support a rotary encoder for scroll or adjustment functions.
- Neither kit includes switches or a controller, requiring the same assembly effort.
KEEBD Dumbpad OLED vs Narfpad specs
Every tracked spec, side by side. Rows marked with a dot differ between the boards.
2 of 10 specs differ
KEEBD Dumbpad OLED
KEEBD Narfpad
Switch options
Layout size
Layout standard
Ergonomics
Knob
Display
Case material
Keycaps
Backlight
Released
Compare prices
Live prices from the stores we track, cheapest in-stock offer first.
Prices in USD are converted to your currency and can change at any time. KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
- Check on Amazon
Amazon
Check price
- Check on Amazon
Amazon
Check price
KEEBD Dumbpad OLED vs Narfpad: your questions
The Dumbpad OLED features a 4x4 layout with an integrated OLED display and uses standard MX switches. The Narfpad is a 3x3 macropad designed specifically for low-profile Kailh Choc switches and includes an acrylic base plate.
No, both are barebones kits. The Dumbpad requires a Pro Micro controller, MX switches, and keycaps. The Narfpad requires a XIAO controller, Choc switches, Choc keycaps, and an encoder knob. Essential components like the controller are not included.
The KEEBD Narfpad is designed for low-profile builds. Its kit includes Kailh Choc sockets and is intended for use with Choc switches and keycaps, which have a lower height than standard MX components.
Some assembly requires soldering. The kit includes through-hole diodes that need to be soldered. However, the vendor listing mentions optional EZ-Solder and 4-pin headers to enable hot-swapping for the controller and display, which could simplify future changes.
The Dumbpad OLED supports up to two rotary encoders. The Narfpad kit includes one rotary encoder, and its 3x3 design likely supports only that single encoder.
The Dumbpad OLED is designed for a Pro Micro controller. The Narfpad is designed for a Seeed Studio XIAO microcontroller. You must source these controllers separately.
For the Narfpad, an acrylic bottom plate is included. For the Dumbpad OLED, the acrylic case is listed as an optional item and is not part of the base kit.
The Dumbpad OLED listing references precompiled firmware. A review for the Narfpad states its QMK firmware is not part of the main QMK branch, requiring local setup and preventing use of the online QMK Configurator tool.
No. Both the KEEBD Dumbpad OLED and Narfpad are sold as DIY kits. You must purchase switches and the corresponding keycaps (MX for Dumbpad, Choc for Narfpad) separately to complete the build.
A Narfpad review mentioned the hardware was easy to solder without a manual, even for a beginner. The Dumbpad uses through-hole diodes which can be easier to solder than some SMD components, but both require basic soldering skills and firmware flashing knowledge.
No. The Narfpad's product description and included Kailh Choc sockets specify it is designed for Kailh Choc low-profile switches. It is not compatible with standard MX-style switches.
Not sold on either?
![[In Stock] W909 15 Keys Wireless Macro Defined Mechanical Keyboard](https://cdn.shopify.com/s/files/1/0549/0262/0278/files/01_f523d005-e559-466b-899c-c9ac5632a0fc.jpg?v=1753942831&width=3840&quality=75)
Still torn?
Answer a few quick questions and the keyboard finder ranks 2,000+ boards by how you will actually use yours.