Epomaker Galaxy100 vs Monsgeek M2Wireless Pre-Built vs Wired DIY Kit
Choose the Epomaker Galaxy100 for a complete, wireless-ready experience, or the Monsgeek M2 for a customizable, wired DIY project.
KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
4.6 (68)4.6 · 68 reviews
from$87at Epomaker
90-day lowLowest price in 90 days
No reviews
from$149at WhatGeek
Which one should you get?
Get the
Epomaker Galaxy100
Wireless Pre-Built
Build quality in the top 15% of 96% boards under $100.
- Triple-mode connectivity with Bluetooth 5.0, 2.4GHz wireless, and wired USB-C.
- Massive 8000mAh battery for extended wireless use.
- Comes fully built with pre-lubed linear switches, PBT keycaps, and a volume knob.
- South-facing LEDs. Shine-through legends stay dark, and some sculpted keycaps can clip the LED.
Get the
Monsgeek M2
Wired DIY Kit
Build quality in the top 10% of 96% boards under $150.
- Sold as a DIY kit, offering a blank canvas for custom switch and keycap choices.
- Includes screw-in stabilizers, which are pre-clipped but not pre-installed.
- Comes with extra modding materials like Teflon pads and tape.
- South-facing LEDs. Shine-through legends stay dark, and some sculpted keycaps can clip the LED.
Your choice fundamentally depends on your desired starting point. The Epomaker Galaxy100 is a premium, complete package focused on wireless convenience and a refined out-of-box experience. The Monsgeek M2 is a project-focused kit for enthusiasts who want to hand-pick every component and enjoy the building process. If you need wireless or want a keyboard today, choose the Galaxy100. If you relish customization and don't mind a wired setup, the M2 is your canvas.
The differences that matter
Skip the 40-row spec sheet. These are the specs that change how each board feels, sounds, and fits your desk.
Epomaker Galaxy100
Monsgeek M2
Connection
Bluetooth, 2.4 GHz, Wired
Wired
Wireless for several devices and wired for lower latency
Switch options
Clicky, Linear
Linear
Knob
Yes
No
Weight
2,000 g
1,960 g
Heavier boards stay planted and lighter ones travel
Screw-in stabilizers
No
Yes
Easier to tune than the plate-mount stabs you get prebuilt
- Epomaker Galaxy100
- Monsgeek M2
- Performance
- 8380
- Build quality
- 8487
- Productivity
- 9395
- Customizability
- 8894
- Portability
- 6246
- Layout size: 96%
- Hot-swappable
- Case material: Aluminum
- Mount style: Gasket Mount
- QMK
- VIA
What will you mostly use it for?
The Epomaker Galaxy100 is the more versatile choice for most ready-to-use scenarios, winning in Gaming, Office, Travel, and Content Creation due to its wireless features, battery, and included accessories. The Monsgeek M2 is the clear winner for Modding, being a dedicated DIY kit. For Programming, it's a tie on layout, but the Galaxy100 holds an advantage with its programmability software support.
Pick the Epomaker Galaxy100
- The Galaxy100 offers a 1000Hz polling rate in both wired and 2.4GHz wireless modes for low latency.
- Its wireless connectivity provides cable-free desk management.
- The pre-lubed linear switches and included keycaps mean it's ready to use immediately.
Epomaker Galaxy100 vs Monsgeek M2 specs
Every tracked spec, side by side. Rows marked with a dot differ between the boards.
7 of 26 specs differ
Epomaker Galaxy100
Monsgeek M2
Switch options
Hot-swappable
Mount style
Sound dampening
Screw-in stabilizers
Layout size
Layout standard
Ergonomics
Knob
Display
Connection
Max polling rate
Battery
USB-C
Case material
Plate material
Keycaps
Weight
Dimensions
Typing angle
Backlight
QMK
VIA
N-key rollover
Mac & Windows
Released
Compare prices
Live prices from the stores we track, cheapest in-stock offer first.
Prices in USD are converted to your currency and can change at any time. KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
Lowest price across stores, Amazon excluded.
Epomaker Galaxy100 vs Monsgeek M2: your questions
Yes, the Epomaker Galaxy100 supports triple-mode connectivity. It can be used via a wired USB-C connection, a 2.4GHz wireless dongle, or Bluetooth 5.0. It is powered by an 8000mAh rechargeable battery for cordless operation.
No, the Monsgeek M2 is sold as a DIY kit or barebones. The kit includes the aluminum case, PCB, mounting plate, and screw-in stabilizers, but you must purchase mechanical switches and keycaps separately to complete the build.
Both aim for a premium sound. The Galaxy100 uses a gasket mount with five specified sound-dampening layers, including Poron and IXPE pads, to create a thocky sound. The Monsgeek M2 also uses a gasket mount with Poron plate foam, an IXPE switch pad, and a 3mm Poron bottom case foam for sound absorption.
The Epomaker Galaxy100 supports QMK and VIA firmware for extensive key remapping and macro programming. The vendor for the Monsgeek M2 explicitly states in the product description that this version does not support QMK/VIA.
The Epomaker Galaxy100 uses plate-mount stabilizers, and its specifications note it is not compatible with screw-in stabilizers. The Monsgeek M2 kit includes screw-in stabilizers that are pre-clipped but require user installation.
For the Epomaker Galaxy100, the vendor description states the thick PBT keycaps are not shine-through, despite having south-facing RGB LEDs. The keycaps for the Monsgeek M2 are not included, so you can choose shine-through or solid keycaps based on your preference.
According to its technical specifications, the Epomaker Galaxy100 has a 1000Hz polling rate when used in USB wired or 2.4GHz wireless mode. The polling rate drops to 125Hz when using Bluetooth 5.0 connectivity.
The Monsgeek M2's vendor description states it uses TTC hot-swappable sockets that are compatible with 3-pin and 5-pin mechanical switches from brands like Cherry, TTC, Outemu, and Gateron.
Both keyboards are very similar in weight. The Epomaker Galaxy100 weighs 2000g (2kg), and the Monsgeek M2 weighs 1960g (1.96kg). The difference is minimal, and both provide a substantial, desk-anchored feel.
Yes, the Epomaker Galaxy100 includes a metal knob. The vendor description highlights this knob for volume control and data entry tasks, and it can be reprogrammed using the VIA software.
The Epomaker Galaxy100 lists five specific layers: a Poron sandwich pad, IXPE switch pad, PET sound enhancement pad, EMDP switch socket pad, and a PET bottom pad. These are designed to cushion keystrokes and create a softer typing sound.
Not sold on either?
Still torn?
Answer a few quick questions and the keyboard finder ranks 2,000+ boards by how you will actually use yours.