Epomaker TH80 V2 vs TH80 V2 ProLCD Screen vs Lower Price

The primary difference is the TH80 V2 Pro includes a 1.06-inch interactive LCD screen and a larger 10000mAh battery. The Pro also has a hot-swappable knob module, according to its product description. The standard TH80 V2 lacks the screen and has an 8000mAh battery.

Yes, both the TH80 V2 and V2 Pro offer tri-mode connectivity. This includes a 2.4GHz wireless dongle, Bluetooth, and a wired USB-C connection. The manufacturer states they can remember up to 5 devices simultaneously.

Yes, both models feature hot-swappable PCBs that are compatible with 3-pin and 5-pin mechanical switches. This allows you to easily change switches without soldering.

The TH80 V2 uses a 5-layer system including PORON foam, IXPE switch pad, a sound enhancement pad, PORON latex switch socket pad, and bottom silicone. The TH80 V2 Pro also has a 5-layer dampening system, listing noise-absorbing foam, a switch pad, sound enhancement pad, switch socket pad, and bottom silicone.

For the TH80 V2, Epomaker claims up to 200 hours of continuous use with RGB off, or 40 hours with RGB on, from its 8000mAh battery. The TH80 V2 Pro has a 10000mAh battery and is also advertised for 200+ hours of wireless usage, though specific RGB-on times are not listed for the Pro model.

Yes. According to the vendor description, the screen on the TH80 V2 Pro can intuitively display practical information like time, battery percentage, and keyboard status. It also allows control over RGB settings via the function layer and knob.

Both models are offered with Epomaker's Creamy Jade linear switches or Sea Salt Silent V2 linear switches. The listings specify that these switches are pre-lubricated from the factory.

Both keyboards feature double-shot PBT keycaps in a Cherry profile, which are grease-resistant. The TH80 V2 Pro's description confirms it includes Mac modifier prints, and this is likely the case for the V2 as well given its stated Mac compatibility.

Both keyboards have a 1000Hz polling rate in wired and 2.4GHz modes. The manufacturer lists a latency of 2ms for wired, 5ms for 2.4GHz, and 11ms for Bluetooth connectivity. Both also feature full anti-ghosting.

Yes. Both the TH80 V2 and V2 Pro are fully programmable using Epomaker software. The V2 uses a downloadable driver, while the V2 Pro is noted to be compatible with a Chrome-based online driver that works both offline and online.

The TH80 V2 includes the keyboard, a 2-in-1 keycap/switch puller with some extra switches, a 2.4GHz receiver, a detachable USB A-to-C cable, and manuals. The TH80 V2 Pro includes the keyboard, a detachable USB A-to-C cable, a 2-in-1 puller, a multilingual manual, and two extra switches.

Both keyboards can provide a quiet experience as they are both available with the optional Sea Salt Silent V2 switches. Their shared gasket mount design and multi-layer sound dampening foams also contribute to reducing typing noise on either model.