grid 100 Ver.Flash vs Realforce Topre RT1 Numpad
Choose the grid 100 Ver.Flash for modularity and switch swapping, or the Realforce RT1 for silent Topre switches and adjustable actuation.
KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
![[In Stock] grid 100 Ver.Flash](https://cdn.shopify.com/s/files/1/1674/0405/files/grid100ICimages20230406X40.jpg?v=1682650306&width=3840&quality=75)
Which one should you get?
Get the
grid 100 Ver.Flash
Hot-swappable
Build quality in the top 20% of Numpad boards under $200.
- Aluminum case with gasket mounting.
- Hot-swappable MINI-PRESS modules and support for CYCLE-ENCODER and CYCLE-JOYSTICK modules.
- QMK and VIA support, with vendor-listed support for a grid 100 configurator.
Get the
Realforce Topre RT1 Numpad
Build quality in the bottom 10% of Numpad boards under $150.
- Silent 45g Topre tactile capacitive switches.
- Actuation point can be adjusted in 0.1mm increments from 0.8mm to 3.0mm.
- Dedicated software supports keymaps, macros, and APC adjustment, with customized settings stored onboard.
- Switches are soldered. Swapping them means soldering.
Pick the grid 100 Ver.Flash if you want to swap switches, change modules, or configure the keypad with QMK and VIA. Choose the Realforce RT1 if silent Topre tactility, adjustable actuation, and stored Mac/Windows keymaps better fit your desk workflow. The key trade-off is modular hardware versus a dedicated typing and keymap feature set.
The differences that matter
Skip the 40-row spec sheet. These are the specs that change how each board feels, sounds, and fits your desk.
grid 100 Ver.Flash
Realforce Topre RT1 Numpad
Hot-swappable
Yes
No
Switch changes without soldering
Case material
Aluminum
Plastic
QMK
Yes
No
The deep option when you want to remap every key
VIA
Yes
No
GUI remapping without compiling firmware
Sound dampening
Yes
No
- grid 100 Ver.Flash
- Realforce Topre RT1 Numpad
- Performance
- 6452
- Build quality
- 8243
- Productivity
- 6946
- Customizability
- 8343
- Portability
- 7067
- Layout size: Numpad
- Connection: Wired
What will you mostly use it for?
The grid 100 Ver.Flash takes the lead for modular setups and switch customization, while the Realforce RT1 is the more work-focused choice if silent tactile switches and adjustable actuation matter most. Programming and content creation favor the grid's module options, while office use favors the RT1's onboard keymap settings and Mac/Windows switching. Travel is a close call because both are wired numpads, with different case materials and cable designs. For gaming, the grid's linear switches and firmware support offer more flexibility, though neither listing provides specific gaming performance figures.
Pick the grid 100 Ver.Flash
- The grid 100 includes semi-silent linear switches, while the RT1 uses silent tactile Topre switches.
- The grid's MINI-PRESS modules are hot-swappable, and the product supports QMK and VIA.
grid 100 Ver.Flash vs Realforce Topre RT1 Numpad specs
Every tracked spec, side by side. Rows marked with a dot differ between the boards.
11 of 19 specs differ
grid 100 Ver.Flash
Realforce Topre RT1 Numpad
Switch options
Hot-swappable
Mount style
Sound dampening
Layout size
Layout standard
Ergonomics
Display
Connection
USB-C
Case material
Keycaps
Typing angle
Backlight
QMK
VIA
N-key rollover
Mac & Windows
Released
Compare prices
Live prices from the stores we track, cheapest in-stock offer first.
Prices in USD are converted to your currency and can change at any time. KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
Lowest price across stores, Amazon excluded.
- Check on Amazon
Amazon
Check price
grid 100 Ver.Flash vs Realforce Topre RT1 Numpad: your questions
The grid 100 Ver.Flash is a modular, hot-swappable keypad with QMK and VIA support. The Realforce RT1 uses silent 45g Topre tactile capacitive switches and adds adjustable actuation.
Yes, the grid 100 is listed as hot-swappable, and its MINI-PRESS modules have hot-swappable sockets. The vendor also says the keypad supports CYCLE-ENCODER and CYCLE-JOYSTICK modules.
No, the RT1's switches are soldered. Replacing them requires soldering.
Yes, QMK and VIA support are listed for the grid 100. The vendor also identifies Vial support and a grid 100 configurator.
Yes, the RT1's APC feature adjusts actuation points in 0.1mm increments from 0.8mm to 3.0mm. Its dedicated software also supports keymap and macro settings.
The RT1 is specifically described as using silent 45g Topre tactile capacitive switches. The grid's included switches are described as linear and semi-silent, so the listings distinguish them as different sound profiles.
Yes, the grid 100 Ver.Flash has RGB and its vendor description specifies an ARGB light bar with 20 LEDs. Its translucent keycaps are described as enhancing the module's RGB backlight.
No, the RT1 is listed without RGB. Its listed features instead include silent Topre switches, adjustable actuation, and PBT keycaps.
Neither model is listed as wireless. Both are wired-only numpads, and the RT1's vendor description specifies a non-detachable cable with a USB-A device-side connection.
The Realforce RT1 supports instant switching between Mac and Windows keymaps, with customized settings stored in onboard memory. The grid listing does not specify equivalent Mac/Windows keymap switching.
The vendor says the Ver.Flash package comes with five MINI-PRESS modules, ten semi-silent switches, and ten frosted keycaps. CYCLE-ENCODER and CYCLE-JOYSTICK are listed as supported module types, not as included items.
The grid 100 is the more hardware-flexible option because it is hot-swappable and supports MINI-PRESS, CYCLE-ENCODER, and CYCLE-JOYSTICK modules. The RT1's switches are soldered, so changing them requires soldering.
Not sold on either?
Still torn?
Answer a few quick questions and the keyboard finder ranks 2,000+ boards by how you will actually use yours.