Compare Keychron K10 V2 vs Q6 Pro Differences Side by Side

The K10 V2 uses a tray mount with an ABS or aluminum frame, while the Q6 Pro uses a full CNC machined aluminum case with a double-gasket design. The Q6 Pro also adds knob support and a polycarbonate plate. Both share a 100% layout, hot-swap sockets, QMK support, and a 4000 mAh battery.

Both are listed with QMK firmware and the Keychron Launcher web app for key remapping and macros. The K10 V2 listing also references VIA support, and both boards include Mac and Windows keycaps with macOS, Windows, and Linux compatibility. Launcher runs in Chrome, Edge, or Opera with the keyboard connected in wired mode.

Both are rated at a 1000 Hz polling rate and support N-Key Rollover in wired and wireless modes, so latency is comparable in practice. The Q6 Pro listing notes the 1000 Hz rate applies to wired mode, with 90 Hz in wireless mode. The K10 V2 is lighter at around 1160 g, which makes it easier to reposition.

Yes, both offer hot-swappable versions that accept most 3-pin and 5-pin MX-style switches, including Cherry, Gateron, Kailh, and Panda. The K10 V2 has a non-hot-swappable option, and Keychron notes that version lacks sound-absorbing foam and silicone pads. The Q6 Pro hot-swap sockets are standard on the listed configurations.

The K10 V2 is listed at about 1160 g, with the vendor page citing roughly 990 g for a specific configuration. The Q6 Pro is listed at 2160 plus or minus 10 g for the fully assembled version. The Q6 Pro is much heavier and better suited to a fixed desk setup.

Both use a 4000 mAh battery. Keychron rates the Q6 Pro at up to 300 hours with the backlight off, and up to 100 hours with RGB at the lowest brightness. The K10 V2 listing confirms the same 4000 mAh capacity without a stated runtime figure.

Yes, the Q6 Pro listing includes knob support and is sold as a fully assembled knob or barebone knob version. The K10 V2 does not list a knob. If a physical dial for volume or app control matters, the Q6 Pro is the only option here.

The K10 V2 ships with Cherry-profile double-shot PBT keycaps and uses north-facing RGB. The Q6 Pro ships with KSA-profile double-shot PBT keycaps that are not shine-through in the fully assembled version and uses south-facing RGB. Reviewers note the K10 V2 has some legend shine-through inconsistencies on F-keys and numpad.

Both are full-size layouts, so neither is compact. The K10 V2 weighs about 1160 g, which is roughly half the Q6 Pro's 2160 g, making it the more practical option for occasional travel. The Q6 Pro's aluminum chassis is better kept on a desk.

The K10 V2 listing cites three adjustable angles at 3.5, 7.7, and 11 degrees, though metadata records 4 and 11 degrees. The Q6 Pro lists a fixed 5.2 degree angle. The K10 V2 offers more adjustment if you prefer a steeper or flatter typing position.

The K10 V2 has a lower starting price across its ABS and aluminum frame versions, so it is the more accessible entry into a 100% QMK hot-swap board. The Q6 Pro costs more and adds a full CNC aluminum case, gasket mount, polycarbonate plate, and knob. The value depends on whether you want premium materials or a lower entry point.

Yes, both ship with Mac and Windows keycaps and support macOS, Windows, and Linux. The Q6 Pro listing also includes a system toggle and separate layouts for each OS. The K10 V2 offers a Mac layout with Apple-style multimedia keys.