Keychron Q10 vs Lemokey P1Alice vs Wireless 75%

The Q10 uses an Alice ergonomic layout with a steel plate and wired-only USB-C, while the Lemokey P1 keeps a standard 75% layout and adds Bluetooth and 2.4 GHz wireless. Both share an aluminum case, gasket mounting, QMK and VIA support, and hot-swap sockets. Your choice comes down to whether ergonomics or cable-free use matters more.

No. The Q10 is listed as wired only over USB-C, with a 1000 Hz polling rate. If you need Bluetooth or 2.4 GHz, the Lemokey P1 is the board in this comparison that offers those modes.

The vendor rates the 4000 mAh battery at up to 200 hours with the backlight off, and up to around 100 hours at the lowest RGB brightness. Charging over USB-C takes around 5 hours according to the listed specs. Real results vary with use.

The Lemokey P1 lists a 1000 Hz polling rate on both 2.4 GHz wireless and wired modes, plus N-key rollover in both modes. The Q10 also polls at 1000 Hz but is wired only. For competitive play without a cable, the P1 has the edge.

Reviewers describe an adjustment period, but several say it becomes natural after some use, especially during longer typing sessions. One reviewer notes their carpal tunnel symptoms eased while using it. If you want zero transition time, a standard layout like the Lemokey P1 is safer.

Yes. Both the Q10 and the Lemokey P1 are hot-swappable and support 3-pin and 5-pin MX-style switches, so no soldering is needed. Both also use screw-in PCB stabilizers for the larger keys.

The Keychron Q10 weighs 2460 g in its fully assembled form, while the Lemokey P1 Pro weighs around 1650 g and the wired P1 around 1720 g. The Q10's extra mass comes from its larger case and steel plate. The P1 is the easier board to move or pack.

Both support QMK firmware and have web-based launchers, the Keychron Launcher on the Q10 and the Lemokey Launcher on the P1. VIA support is listed for both, but the P1 vendor page notes its VIA keymap needs a JSON file loaded manually because approval is pending. The Q10's launcher requires a Chromium-based browser and a wired connection.

The Keychron Q10 uses a steel plate, which gives a firmer platform and is often paired with foam or force-break mods by reviewers. The Lemokey P1 uses a polycarbonate plate for a softer feel, along with IXPE, PET, and absorbing foams. This is a real feel difference, not just a spec line.

The Q10 adds extra macro keys down the left side plus a left-mounted aluminum rotary encoder, all programmable through VIA. The Lemokey P1 also has a programmable knob and a macro column. The Q10's left-side placement is less common and lets right-handed users keep a hand on the mouse.

Yes. Both the Q10 and the Lemokey P1 are offered in fully assembled and barebone versions, and barebone kits ship without keycaps and switches. That makes either a reasonable base if you already have switches and caps you prefer.

The Lemokey P1 is smaller at 322 x 140 mm versus 385 x 157 mm for the Q10, and lighter at roughly 1650 g versus 2460 g. It also offers Bluetooth and 2.4 GHz modes so you can leave the cable behind. The Q10's wired-only design and mass make it the less portable option.