Leopold FC220TP Numpad vs KEEBD Pee TwoWireless or DIY
Choose the Leopold FC220TP for a ready-to-use wireless numpad with hot-swap switches, or the KEEBD Pee Two for a barebones DIY kit.
KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
Which one should you get?
Get the
Leopold FC220TP Numpad
Hot-swappable
Build quality in the top 15% of Numpad boards under $50.
- Bluetooth, 2.4 GHz, and USB-C wired connectivity, with connections for up to five devices.
- Hot-swap sockets support both 3-pin and 5-pin switches.
- QMK and VIA support in wired mode, plus a Windows and Mac switching shortcut.
Get the
KEEBD Pee Two
Build quality in the bottom 5% of Numpad boards under $50.
- Barebones DIY kit format for buyers who want to assemble a numpad.
- The product listing identifies a dual-switch kit and a switch/encoder kit option.
- The listing provides a Pee-Two build guide.
- Switches are soldered. Swapping them means soldering.
For a complete numpad with wireless connectivity, RGB, hot-swap sockets, and QMK/VIA support, choose the Leopold FC220TP. Choose the KEEBD Pee Two if you specifically want a barebones DIY project and are prepared for its soldered switches and separately required components.
The differences that matter
Skip the 40-row spec sheet. These are the specs that change how each board feels, sounds, and fits your desk.
Leopold FC220TP Numpad
KEEBD Pee Two
Hot-swappable
Yes
No
Switch changes without soldering
QMK
Yes
No
The deep option when you want to remap every key
VIA
Yes
No
GUI remapping without compiling firmware
Sound dampening
Yes
No
Backlight
RGB
None
RGB for looks and low light rather than speed
- Leopold FC220TP Numpad
- KEEBD Pee Two
- Performance
- 7837
- Build quality
- 7739
- Productivity
- 8941
- Customizability
- 8949
- Portability
- 9062
- Layout size: Numpad
What will you mostly use it for?
The FC220TP leads across these use cases because it combines complete-board features with wireless options, switch flexibility, and programming support. Its silent switch variants and sound absorption make it a particularly practical choice for quieter desk use. The Pee Two is more directly suited to buyers who specifically want to start with a barebones DIY numpad kit. Its soldered switches limit one common route for later switch changes.
Pick the Leopold FC220TP Numpad
- The FC220TP supports wired USB-C and wireless Bluetooth or 2.4 GHz connections.
- Its vendor description specifies N-key rollover in both wired and wireless modes.
- The Pee Two is a barebones kit and requires separate MX switches and a ProMicro controller.
Leopold FC220TP Numpad vs KEEBD Pee Two specs
Every tracked spec, side by side. Rows marked with a dot differ between the boards.
9 of 19 specs differ
Leopold FC220TP Numpad
KEEBD Pee Two
Switch options
Hot-swappable
Mount style
Sound dampening
Layout size
Layout standard
Ergonomics
Display
Connection
Battery
USB-C
Case material
Keycaps
Backlight
QMK
VIA
N-key rollover
Mac & Windows
Released
Compare prices
Live prices from the stores we track, cheapest in-stock offer first.
Prices in USD are converted to your currency and can change at any time. KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
- Check on Amazon
Amazon
Check price
- Check on Amazon
Amazon
Check price
Leopold FC220TP Numpad vs KEEBD Pee Two: your questions
Yes. The FC220TP supports Bluetooth and 2.4 GHz wireless, as well as wired USB-C connectivity. Its vendor description says it can connect to up to five devices across its connection options.
The Pee Two is listed as a DIY barebones kit. Its product page identifies a ProMicro controller, MX switches, and MX keycaps as required to complete it.
Yes. The FC220TP has hot-swap sockets that support both 3-pin and 5-pin switches. The vendor lists several linear and silent switch variants for the board.
The Pee Two's switches are soldered, so swapping them requires soldering. This differs from the FC220TP, which has hot-swap sockets.
Yes. The FC220TP supports both QMK and VIA, with programming available in wired mode only. Its vendor description also provides a VIA JSON download.
The KEEBD Pee Two is listed without RGB. The Leopold FC220TP, by contrast, has RGB backlighting.
The FC220TP has listed silent options, including silent linear and silent tactile switches. Its vendor description also specifies a three-layer sound absorption package.
The vendor lists a USB-A receiver, USB-C to USB-A cable, a combined switch and keycap puller, two spare switches, and a quick guide. The board is also described as pre-built, with PBT keycaps and switches.
The Pee Two product page identifies a ProMicro controller, MX switches, and MX keycaps as required components. It also links to a Pee-Two build guide.
Yes. The vendor says it can connect to up to five devices: three over Bluetooth, one over 2.4 GHz, and one wired. The FC220TP also has a shortcut to switch between Windows and Mac.
The FC220TP offers hot-swap sockets for 3-pin and 5-pin switches and supports QMK and VIA in wired mode. The Pee Two is a DIY kit, but its switches are soldered, so changing them requires soldering.
Yes. The FC220TP is listed with a 2000 mAh rechargeable battery. The Pee Two listing does not specify a battery.
Not sold on either?
![[In Stock] Stars21 Programmable Mechanical Numpad](https://cdn.shopify.com/s/files/1/0549/0262/0278/files/0000_ec55349a-00a4-4b82-8d05-760c94529d10.jpg?v=1735897191&width=3840&quality=75)
![[In Stock] Lelepad Custom Numpad/Macropad Hotswappable Keyboard - Image: 3](https://cdn.shopify.com/s/files/1/1674/0405/files/DSC06205.jpg?v=1736839891&width=3840&quality=75)
Still torn?
Answer a few quick questions and the keyboard finder ranks 2,000+ boards by how you will actually use yours.