Yunzii MIKIBY K98 vs X98QMK vs Standard Firmware

The key differentiator is firmware customization. The X98 supports QMK/VIA open-source firmware for deep key remapping and macros, while the K98 uses standard vendor software. The X98 also has an 8000mAh battery (double the K98's 4000mAh) and a transparent PC case, whereas the K98 uses a traditional opaque design with double-shot PBT keycaps.

The Yunzii X98 has better firmware customization because it supports QMK and VIA open-source firmware. This allows you to remap keys, create macros, adjust RGB effects, and customize the rotary knob directly through an online or local interface. The K98 supports Windows software and an online website for customization, but does not offer the same depth as QMK/VIA.

Yes, both keyboards feature full-key hot-swappable sockets that support 3-pin and 5-pin mechanical switches. This means you can easily replace switches without soldering on either model. The K98 and X98 both come with pre-lubed linear switch options: the K98 offers YUNZII Milk V2 or Cocoa Cream V2, while the X98 offers Snow or YUNZII Crystal linear switches.

The Yunzii X98 has a longer battery life thanks to its 8000mAh battery, which is double the 4000mAh battery found in the MIKIBY K98. Both keyboards are wireless with Bluetooth and 2.4 GHz connectivity, but the X98 offers significantly more capacity for extended use between charges.

Yes, both the Yunzii MIKIBY K98 and the Yunzii X98 support tri-mode connectivity: Bluetooth, 2.4 GHz wireless, and wired USB-C. The K98 uses Bluetooth 5.0, while the X98 uses Bluetooth 5.3. Both can connect up to 5 devices simultaneously and are compatible with Windows, Mac, Android, and iOS systems.

The Yunzii X98 has a stated 1000 Hz polling rate according to the product specifications. The polling rate for the Yunzii MIKIBY K98 is not mentioned in the available product data, so it cannot be confirmed. If consistent low-latency response is important, the X98 provides a verified specification.

The Yunzii MIKIBY K98 uses double-shot PBT Cherry profile keycaps, which are known for durability and resistance to shine over time. The Yunzii X98 uses PC CSA profile keycaps with 3D printed characters, which are transparent to allow RGB shine-through. The X98 keycaps are made from PC/ABS material as noted in the metadata.

The X98 is specifically designed with 5 layers of dampening materials including Poron, IXPE, Silicone, and Sound Enhancement Pads to create a milky, creamy acoustic profile. The K98 also features sound dampening and is described as a creamy keyboard, but the X98 provides more detailed layering for a refined acoustic experience. Both use gasket mounting to reduce noise.

The Yunzii X98 is more suitable for content creation due to its 8000mAh battery for long wireless sessions and QMK/VIA support for customizing keys to editing software shortcuts. Its built-in sound dampening also reduces typing noise, which is beneficial when recording voice-overs. Both keyboards maintain a full number pad in a compact 98% layout.

Yes, the MIKIBY K98 is lighter at 1144g and measures 385 x 146 x 48mm. The X98 is heavier at 1270g and measures 391 x 142 x 45mm. The K98 is slightly shorter in width but taller in height, while the X98 is slightly wider and thinner. Both are 98% layouts with similar desk footprints.

Both keyboards have a function knob, but customization differs. On the X98 with QMK/VIA, you can fully customize the knob functions including volume, RGB effects, and other commands. On the K98, the knob can be customized through the vendor software and defaults to switching between gaming mode (brightness and RGB switching) and office mode (volume and play/pause).