Monsgeek M1 vs M1W V3 SPWired vs Wireless 75%

According to the vendor listing, the standard Monsgeek M1 does not support QMK or VIA and uses a downloadable driver instead. However, the metadata lists QMK and VIA support, which may apply to a specific version. It is important to check the individual product listing to confirm which firmware is supported.

The M1W V3 SP features hot-swappable sockets that support both 3-pin and 5-pin switches according to the vendor. This gives you the flexibility to swap in a wide range of mechanical switches from different brands without soldering.

The Monsgeek M1 is available as a DIY kit or barebones kit, meaning it comes without switches and keycaps. The vendor specifically calls it a 'DIY Keyboard Kit,' allowing you to choose and install your own switches and keycaps for a fully customized build.

The Monsgeek M1W V3 SP comes with a 6000mAh battery, as stated in both the metadata and the vendor description. This large battery capacity enables extended wireless use, reducing the frequency of recharging.

The Monsgeek M1 uses a gasket mount structure with Poron foam and an IXPE switch pad, which typically gives a softer and more dampened typing feel. The M1W V3 SP uses a plate mount, which is generally firmer. The M1 is likely better for those who prefer a cushioned, flexy typing experience.

Yes, the M1W V3 SP supports three connectivity options: wired via USB-C, Bluetooth, and 2.4 GHz wireless. This allows you to use it completely untethered with a stable low-latency connection.

The M1W V3 SP comes with OEM profile PBT keycaps that feature shine-through front-facing legends, according to the vendor. PBT is known for being more resistant to shine and wear over time compared to ABS.

Yes, the Monsgeek M1 features south-facing SMD RGB backlighting. The south-facing orientation is designed to avoid interference with Cherry profile keycaps and improve backlight visibility from the user's perspective.

Yes, the M1W V3 SP is compatible with both macOS and Windows. The vendor mentions a switch under the CAPS LOCK key that allows you to swap between operating system modes for proper key mapping.

The Monsgeek M1 uses screw-in stabilizers from Akko with nylon housing, according to the vendor listing. Screw-in stabilizers are generally preferred by enthusiasts for their stability and reduced vibration compared to clip-in or plate-mount ones.

The M1W V3 SP includes the pre-built keyboard, bonus screw-in stabilizers, a coiled USB-C cable, and a user manual. The vendor listing specifies these items as part of the package.