Compare Keychron Q0 Max vs Q1 V1 Differences Side by Side

The Q0 Max is a numpad, listed by Keychron as a custom number pad with a macro column and a rotary encoder knob on the left side. It does not include a full letter layout, so it works as an add-on to an existing keyboard. If you need a complete layout, the Q1 V1 is a 75% keyboard.

No, the Q1 V1 is wired only and connects via USB-C. Keychron lists its connectivity as Type-C wired and includes a Type-C cable plus a Type-A to Type-C adapter. For wireless use, the Q0 Max supports Bluetooth 5.1, 2.4 GHz, and wired USB-C.

The Q0 Max is far easier to carry because it weighs 684g and measures 118 x 137mm, while the Q1 V1 weighs 1700g and is 328mm long. The Q0 Max also offers Bluetooth 5.1 and 2.4 GHz wireless, whereas the Q1 V1 is wired only. Its 1800mAh battery is rated by Keychron for up to 50 hours with RGB at lowest brightness.

Yes, both the Q0 Max and Q1 V1 have hot-swappable sockets that Keychron says support 3-pin and 5-pin MX-style switches without soldering. The Q1 V1 also supports third-party screw-in PCB stabilizers. Switch options differ: the Q0 Max lists Gateron Jupiter switches, while the Q1 V1 lists Keychron K Pro and Gateron Phantom switches.

The Q1 V1 is described by Keychron with a gasket mount and up to 2.5mm of flex, which the vendor presents as a flexible typing feel. The Q0 Max also uses a gasket mount, but its steel plate and numpad form factor are not described with a flex figure. If flex is a priority, the Q1 V1 has the clearer specification.

Keychron lists the Q0 Max as compatible with macOS, Windows, and Linux. It supports QMK firmware and the Keychron Launcher web app for remapping and macros. The Q1 V1 also supports macOS and Windows with a system toggle and additional keycaps for both systems.

Keychron lists a 1000 Hz polling rate on 2.4 GHz and wired modes for the Q0 Max, and 90 Hz in Bluetooth mode. The Q1 V1 is also listed at 1000 Hz but is wired only. For low-latency wireless use, the Q0 Max on 2.4 GHz is the relevant option.

The Q1 V1 offers a full 75% layout, which is more practical for coding shortcuts and symbol entry than a numpad alone. It also supports QMK and the Keychron Launcher web app for remapping and macros. The Q0 Max can complement a setup for numeric entry, but it is not a full typing keyboard.

Yes, Keychron lists OSA double-shot PBT keycaps for the Q1 V1 in one section of the product page. The specifications section also mentions ABS shine-through keycaps, so buyers should confirm the keycap material for the specific configuration they order. The box contents note double-shot PBT keycaps with additional Mac and Windows keycaps.

Keychron rates the Q0 Max 1800mAh battery for up to 50 hours with RGB at lowest brightness. Actual runtime will vary with backlight brightness and connection mode. The Q1 V1 has no battery because it is a wired-only keyboard.

Yes, both the Q0 Max and Q1 V1 support QMK firmware and the Keychron Launcher web app for key remapping and macros. Keychron notes the Launcher works in the latest Chrome, Opera, or Edge browser and requires a wired connection. This makes both boards suitable for custom shortcuts and layers.

The Q1 V1 is much heavier at 1700g fully assembled, compared with 684g for the Q0 Max. That weight comes from its larger aluminum case and contributes to a planted feel on the desk. The Q0 Max is easier to move between setups because of its lower weight and smaller dimensions.