Shortcut Studio Bridge75 R3 vs Bridge75 PlusHE vs FR4 Plate
Choose the Bridge75 R3 for Hall Effect magnetic switches and 8000 Hz polling, or the Bridge75 Plus for its FR4 plate, pre-built setup, and N-Key Rollover.
KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
Which one should you get?
Get the
Shortcut Studio Bridge75 R3
HE
Build quality in the top 20% of 75% boards under $150.
- Hall Effect magnetic switches with an 8000 Hz polling rate.
- DIY kit/barebones configuration, with the vendor describing a ball-catch case and modifiable foams.
- Magnetic switches only. Standard MX switches will not fit.
Get the
Shortcut Studio Bridge75 Plus
FR4 Plate
Build quality in the top 20% of 75% boards under $100.
- FR4 plate with south-facing RGB LEDs.
- Pre-built configuration with listed N-Key Rollover and Mac/Win support.
- South-facing LEDs. Shine-through legends stay dark, and some sculpted keycaps can clip the LED.
Get the Bridge75 R3 if you want Hall Effect magnetic switches, 8000 Hz polling, and a DIY/barebones starting point. Choose the Bridge75 Plus for its FR4 plate, pre-built setup, and N-Key Rollover. Check the Plus's south-facing LED behavior if shine-through legends or sculpted keycaps matter to your build.
The differences that matter
Skip the 40-row spec sheet. These are the specs that change how each board feels, sounds, and fits your desk.
Shortcut Studio Bridge75 R3
Shortcut Studio Bridge75 Plus
Hall effect (magnetic)
Yes
No
Adjustable actuation helps in games and not in normal typing
Max polling rate
8,000 Hz
1,000 Hz
Higher polling helps competitive FPS and does nothing for typing
Backlight
RGB
RGB, south-facing
RGB for looks and low light rather than speed
N-key rollover
No
Yes
Mac & Windows
No
Yes
- Shortcut Studio Bridge75 R3
- Shortcut Studio Bridge75 Plus
- Performance
- 8879
- Build quality
- 7977
- Productivity
- 6784
- Customizability
- 8074
- Portability
- 8892
- Layout size: 75%
- Connection: Bluetooth, 2.4 GHz, Wired
- Hot-swappable
- Battery: 8,000 mAh
- Case material: Aluminum
- Mount style: Gasket Mount
What will you mostly use it for?
The R3 is the more distinct gaming and hands-on customization option, centered on magnetic Hall Effect switches and 8000 Hz polling. The Plus is a more straightforward pre-built choice, with its FR4 plate and N-Key Rollover among its differentiators. Office and content-creation preferences lean toward the Plus based on its listed setup and input features, while programming presents trade-offs rather than a decisive winner. For travel, both offer the same listed wireless modes and battery capacity.
Pick the Shortcut Studio Bridge75 R3
- The R3 has magnetic Hall Effect switches.
- Its listed polling rate is 8000 Hz, compared with 1000 Hz for the Plus.
Shortcut Studio Bridge75 R3 vs Bridge75 Plus specs
Every tracked spec, side by side. Rows marked with a dot differ between the boards.
7 of 22 specs differ
Shortcut Studio Bridge75 R3
Shortcut Studio Bridge75 Plus
Switch options
Hall effect (magnetic)
Hot-swappable
Mount style
Sound dampening
Layout size
Layout standard
Ergonomics
Display
Connection
Max polling rate
Battery
USB-C
Case material
Plate material
Keycaps
Typing angle
Backlight
VIA
N-key rollover
Mac & Windows
Released
Compare prices
Live prices from the stores we track, cheapest in-stock offer first.
Prices in USD are converted to your currency and can change at any time. KeebFinder may earn a commission when you buy through these links, at no extra cost to you.
Lowest price across stores, Amazon excluded.
- Check on Amazon
Amazon
Check price
Shortcut Studio Bridge75 R3 vs Bridge75 Plus: your questions
The R3 uses magnetic Hall Effect switches and lists an 8000 Hz polling rate. The Plus has a flex-cut FR4 plate, a listed 1000 Hz polling rate, and a pre-built configuration.
The R3 is the gaming-focused choice in this comparison because it combines Hall Effect magnetic switches with an 8000 Hz polling rate. The Plus lists a 1000 Hz polling rate and does not specify magnetic switches.
No, the R3's compatibility guidance specifies magnetic switches only. Standard MX switches will not fit its sockets.
The Plus is listed as hot-swappable and uses a flex-cut PCB. Its product description does not identify a magnetic-switch requirement.
Yes, the Plus's specifications list an FR4 plate, and its vendor description calls it a flex-cut FR4 plate. The R3's metadata does not specify a plate material.
Yes, VIA support is listed for both the R3 and the Plus. The R3 vendor description says VIA can be used to tailor keymaps.
Both list Bluetooth and 2.4 GHz connectivity, as well as wired use. Each also has an 8000mAh battery listed.
The Plus's compatibility guidance says shine-through legends stay dark with its south-facing LEDs. It also warns that some sculpted keycaps can clip the LED.
The R3 metadata identifies it as a DIY kit/barebones. Its vendor description also describes a pre-assembled kit, so buyers should check the exact R3 configuration before ordering.
Yes, N-Key Rollover is listed as an extra feature for the Plus. Its vendor product characteristics also specify USB key rollover as NKRO.
The R3 is the more explicitly mod-focused option: it is listed as DIY/barebones, and its vendor describes a ball-catch mechanism and modifiable foams. The Plus is hot-swappable and has a flex-cut PCB, with a specified FR4 plate.
Yes, both list aluminum cases and gasket mounts. The Plus vendor description additionally identifies a ball-catch gasket mount design.
Not sold on either?
Still torn?
Answer a few quick questions and the keyboard finder ranks 2,000+ boards by how you will actually use yours.