Black Friday deals are liveShop now

DIY Sofle Choc Wireless Split Mechanical Keyboard ShadowSeries - build your own
New

Keyboard Hoarders Sofle Choc ShadowSeries DIY Kit

Compare prices from $160 to $206

The Keyboard Hoarders Sofle Choc ShadowSeries DIY Kit is a split, low-profile keyboard for people who want a compact ergonomic layout and are comfortable assembling electronics. It suits keyboard hobbyists who want wireless use and room to customize their keymap, but is less suitable if you need a ready-to-use board or prefer standard-height switches.</p

Read more

Compare prices and purchase options

Click the coupon code for a discount. Features and specs may vary by model version.

Keyboard Hoarders Sofle Choc ShadowSeries DIY Kit

AmazonGlobalPrice at Amazon

DIY Sofle Choc Wireless Split Mechanical Keyboard ShadowSeries - build your own

Keyboard HoardersBased in US$160
Coupon code

*I may earn a commission if you purchase through these links. Thanks for your support!

Price history

The price history chart tracks the lowest in-stock price per store over time, excluding Amazon (shipping costs not included).

Price now
$160
Tracked since
Nov 20, 2026

Price in USD

Similar split keyboards

Same price range, layout, and form factor, from different brands.

Compare specs
Compare specs

Compare Keyboard Hoarders Sofle Choc ShadowSeries DIY Kit vs Mechboards Forager vs KEEBD Corne Choc specification

Compare similar keyboards side by side, or use the comparison table to compare all keyboards!

21 of 25 specs differ

Specs of Keyboard Hoarders Sofle Choc ShadowSeries DIY Kit, Mechboards Forager, KEEBD Corne Choc side by side
Keyboard Hoarders Sofle Choc ShadowSeries DIY Kit$160Mechboards Forager$105KEEBD Corne Choc$134
Where to buy
Stores⁠ (differs)
Main differences
Stands out with⁠ (differs)
  • Has Tactile, Linear, Clicky switch options
  • Includes a Yes, IPS display
  • Connects via USB-C
  • Supports QMK firmware
  • Uses a PCB Mount mounting style
  • Equipped with a 120 mAh battery
  • Has Linear, Tactile switch options
  • Includes a Yes, LED display
  • Uses a Plate Mount mounting style
  • Released in 2022
  • Has Tactile switch options
  • Built with the ANSI layout standard
  • Includes a Yes display
  • Supports Bluetooth, Wired, Wireless, Wired only connectivity
  • Made with a Acrylic, Plastic case
  • Features ABS keycaps
  • Offers Yes, Rgb RGB lighting
KeebFinder scores
Scores out of 100, same scale on every axis.
Performance⁠ (differs)43.141.744.3Best
Build quality⁠ (differs)66Best60.343.1
Productivity⁠ (differs)53.5Best4550.8
Customizability⁠ (differs)60.960.974.7Best
Portability⁠ (differs)83.8Best79.679.7
Typing
Switch options⁠ (differs)
  • Tactile
  • Linear
  • Clicky
  • Linear
  • Tactile
  • Tactile
ProfileLow profileLow profileLow profile
Hot-swappableYesYesYes
Layout
Layout size
  • Other
  • Other
  • Other
Layout standard⁠ (differs)Not specifiedNot specified
  • ANSI
ErgonomicsSplitSplitSplit
Display⁠ (differs)IPSLEDYes
Connectivity
Connection⁠ (differs)
  • Bluetooth
  • Wireless
  • Bluetooth
  • Wireless
  • Bluetooth
  • Wired
  • Wireless
  • Wired only
Max polling rate⁠ (differs)1,000 Hz1,000 HzNot specified
Battery⁠ (differs)120 mAhNot specifiedNot specified
USB-C⁠ (differs)YesNoNo
Software
QMK⁠ (differs)YesNoNo
Build
Mount style⁠ (differs)PCB MountPlate MountNot specified
Case material⁠ (differs)Not specifiedNot specified
  • Acrylic
  • Plastic
Keycap material⁠ (differs)Not specifiedNot specified
  • ABS
Backlight⁠ (differs)NoNoRgb
Case colors⁠ (differs)BlackWhite, BlackBlack
Release year⁠ (differs)202620262022
Something incorrect or missing? Please
let me know
.

Product description

The Keyboard Hoarders Sofle Choc ShadowSeries DIY Kit is a split, low-profile keyboard for people who want a compact ergonomic layout and are comfortable assembling electronics. It suits keyboard hobbyists who want wireless use and room to customize their keymap, but is less suitable if you need a ready-to-use board or prefer standard-height switches.

Layout and customization

The split layout lets you position each half separately, which may be more comfortable than keeping both hands close together. The kit supports Kailh Choc V1 switches and includes blank keycaps. Hot-swap sockets make changing switches easier after assembly. Two encoders and extra sockets support alternate configurations, so you can tailor controls and layout to your preferences.

Wireless use and firmware

Bluetooth and ZMK firmware allow cable-free typing and custom keymaps. A USB-C cable is included for charging. The socketed battery can be connected during assembly without soldering its leads. Optional low-power e-paper displays can add status information, but they are not required.

Build considerations

  • The kit includes the case and keycaps, but assembly requires soldering and a small screwdriver.
  • A build guide is referenced, though the vendor says its own guides are still being developed. Some build experience or patience with instructions may help.
  • The listing describes a DIY kit but also calls the keyboard pre-built and pre-flashed. Confirm which form you will receive before choosing it.
  • Low-profile Choc switches limit your choice of compatible switches and keycaps compared with standard-height boards.

Frequently asked questions (FAQ)

It’s a build-it-yourself split keyboard kit based on the Sofle Choc layout. The two halves are designed to work together over Bluetooth, with a low-profile form factor, Kailh Choc V1 switch support, and ZMK firmware.

You’ll need to solder components during assembly, so some soldering experience—or the patience to follow a detailed build guide—is helpful. You’ll also need a soldering iron, solder, and a small hobby screwdriver.

The PCB is designed for Kailh Choc V1 low-profile switches and supports hot-swap sockets, so compatible switches can be changed without soldering each switch directly to the board. Blank keycaps are included.

The kit includes parts for multiple build variations, including two rotary encoders and two extra switch sockets. This gives you options when deciding how to configure the available positions; your chosen layout and firmware should match the way you assemble it.

The keyboard uses Bluetooth and is powered by a socketed 120 mAh LiPo battery. USB-C is provided for charging, and a USB cable is included. The USB-C connection is also useful when working with the keyboard’s firmware.

It uses ZMK, which supports wireless keyboard configurations and customizable keymaps. You can use a compatible existing configuration or adapt the firmware to suit your preferred layout and key assignments.

Nice View low-power e-paper displays are an optional feature rather than a required part of the build. The keyboard can be assembled and used without them.

The kit is intended as a complete DIY build and includes the case, blank keycaps, and the parts needed for its supported configurations. You’ll still need basic assembly tools, including a soldering iron and solder.

Yes. Tenting is optional, so you can use the two keyboard halves on a flat surface. If you prefer an angled position, a compatible tenting solution can be added separately.

Yes. The ZMK firmware can be customized, allowing you to remap keys and tailor layers to your workflow. Make sure the firmware configuration corresponds to the physical layout you assembled, especially if you use encoders.

Other users are also interested in these products

Discover products that are frequently liked and visited by other users!