Compare Keychron Q1 V2 vs Lemokey L1 Differences Side by Side

No, the Q1 V2 is a wired-only keyboard using a Type-C connection. The vendor lists 1000 Hz polling rate but no Bluetooth or 2.4 GHz mode. If wireless is required, the Lemokey L1 is the alternative in this comparison.

Yes, the L1 supports 2.4 GHz, Bluetooth 5.1, and Type-C wired connectivity. The vendor states Bluetooth can pair with up to 3 devices, and the 2.4 GHz mode uses a 1000 Hz polling rate. Bluetooth polling is listed at 90 Hz.

The L1 uses a 4000mAh rechargeable battery rated up to 200 hours with backlight off and up to 100 hours with RGB at lowest brightness, per the vendor. Charging takes around 5 hours over USB Type-C. These are lab results and may vary with use.

The Lemokey L1 is positioned for gaming with a 2.4 GHz wireless connection rated at average latency under 2 ms and wired average latency under 1.5 ms, according to the vendor. The Q1 V2 is wired only with a 1000 Hz polling rate but no published latency figures. For wireless gaming, the L1 has the clearer claims.

The Q1 V2 metadata lists ANSI layout, but the vendor description mentions a separate Q1 ISO collection covering UK, German, Nordic, Swiss, French, and Spanish layouts. The standard Q1 V2 listing here is ANSI. Check the specific ISO listing if you need those layouts.

Yes, the L1 ISO collection includes UK, German, Nordic, and Swiss layouts, and a Barebone ISO option suits other ISO countries. The ANSI version is available in Fully Assembled and Barebone forms. Layout options differ by region and configuration.

The Q1 V2 uses a steel plate, while the L1 uses a PC (polycarbonate) plate. The vendor notes that Q1 V2 Phantom Yellow and Silver switch versions switch to an aluminum plate and ABS keycaps. Plate material affects sound and feel, so this is a key differentiator.

Yes, both support hot-swap sockets for 3-pin and 5-pin MX-style switches including Gateron, Cherry MX, and Kailh, per the vendors. Neither requires soldering to change switches. The Q1 V2 vendor notes the steel plate can make switch removal firmer.

Both list QMK firmware and VIA support, along with Keychron Launcher or Lemokey Launcher web apps for remapping. The L1 vendor notes its VIA JSON file must be imported manually because VIA recognition is pending. Both vendors recommend a Chromium browser and a wired connection for the Launcher.

The L1 is about 1887g and the Q1 V2 is 1825g in fully assembled form, per the vendors. Both are full aluminum 75% boards, so neither is a light travel keyboard. The difference is small and both are best kept on a desk.

The Q1 V2 Fully Assembled version ships with OSA profile double-shot PBT keycaps, though the Phantom Yellow and Silver switch versions use double-shot ABS. The L1 ships with Cherry double-shot PBT keycaps. Both are non-shine-through and paired with south-facing RGB.

Yes, both offer Barebone Knob configurations without keycaps or switches. The Q1 V2 also lists Fully Assembled, Fully Assembled Knob, and a Special Edition option. Barebone kits suit buyers who already have switches and keycaps.